APV solar charger is a combination of APC inverter and solar charger. The APV pure sine wave inverter not only makes your solar system simple in wiring, but also has all the unique features from the inverter and solar charger.

1. APV pure sine wave inverter adopts low quiescent current, and power saver mode to reduce power consumption to *0W(3s sensing cycle)/3W(*0s sensing cycle) *. It can extract max. power from various batteries with different protections.
2. High overload ability of our APV charger is up to **0% rated power(*0 sec.), and low voltage trip 9.5V/*0V or *0V/*0.5V is selectable.
3. Our APV solar charger can achieve reverse current protection and battery temperature compensation, with the high efficiency MPPT function(*7%). Auto DC voltage can be detected between *2V/*4V.
4. Our APV pure sine wave inverter supports *-step intelligent battery charging, and equips with 8 preset battery type selector for totally flat batteries. Its powerful charge rate up to *0Amp**. In addition, PFC(power factor correction) is adopted for charger, which has less power consumption than conventional units.
5. LCD status display, USB communication port, battery/AC priority switch are available for our APV pure sine wave inverter, it also has *7 alarms/warnings for easier operation and trouble-shooting, and ability to switch the unit on/off. In addition, select/deselect power saver mode can be used too.
6. The APV solar charger has *5s delay before transfer when AC resumes, and the function of overload protection when it equips with generator. Also, it allows start up and through power with depleted batteries.
7. *0ms typical transfer time between battery and AC, which guarantees power continuity of APV pure sine wave inverter. Its AC voltage is selectable (******3V or ******3V) for different kinds of loads.

• Note:*For 1KW one. **For some models.